Cross Reference Factors
Combustible Gas - Cross Reference Factors for Altair 4X General Purpose Calibration Using the Standard Combustible Sensor and Calibration Cylinder (PN 10045035) Set to 58% LEL
| Acetylene |
0.6 |
| Butane |
0.7 |
| Cyclohexane |
0.9
|
| Diethylether |
0.7 |
| Ethane |
0.6 |
| Ethanol |
0.6 |
| Ethylene |
0.5 |
| Gasoline |
0.9 |
| n-Hexane |
0.9 |
| Hydrogen |
0.6 |
| Isopropyl Alcohol |
0.9 |
| Methane (5.0 Vol%) |
0.5 |
| Methanol |
0.5 |
| Pentane Simulant |
1.0 |
| Pentane |
0.7 |
| Propane (2.1 Vol%) |
0.6 |
| Toluene |
1.0 |
| Xylene |
2.5 |
|
1.
|
For an instrument calibrated on Pentane Simulant, multiply the displayed %LEL value by the conversion factor above to get the true %LEL. |
|
2.
|
These conversion factors should be used only if the combustible gas is known. |
|
3.
|
These conversion factors are typical. Individual units may vary by +25% from these values. |
|
4.
|
The results are intended for guidance only. For the most accurate measurements, an instrument should be calibrated using the gas under investigation. |
Combustible Gas (with Optional EX-H Sensor) - Cross Reference Factors for Altair 4X General Purpose Calibration Using the Optional Heavy Hydrocarbon Sensor and Calibration Cylinder (PN 10045035) Set to 58% LEL
| Acetone |
0.6 |
| Methyl Ethyl Ketone (MEK) |
1.0 |
| Nonane |
1.5 |
| Xylene |
1.6 |