Monitoring Oxygen Concentration
The device monitors the oxygen concentration in ambient air. The alarm set points can be set to activate on two different conditions:
| • | Enriched - oxygen concentration > 20.8 vol. % or |
| • | Deficient - oxygen concentration < 19.5 vol.% . |
While the device can detect up to 30% oxygen in ambient air, it is approved for use only up to 21% oxygen.
WARNING!
If an alarm activates while using the device, leave the area immediately. Remaining in the area under such circumstances can cause serious personal injury or death.
Failure to follow this warning can result in serious personal injury or death.
When the alarm set point is reached for either of the above conditions:
| • | an alarm sounds |
| • | alarm LEDs flash |
| • | a vibrating alarm triggers |
| • | device displays and flashes the Alarm icon |
|
The LOW alarm [oxygen deficient] is latching and will not automatically reset when the O2 concentration rises above the LOW set point. To reset the alarm press the p button. If the alarm condition still exists, the p button only silences the alarm for five seconds. False oxygen alarms can occur due to changes in barometric pressure [altitude] or extreme changes in ambient temperature. It is recommended that an oxygen calibration be performed at the temperature and pressure of use. Be sure that the device is in known fresh air before performing a calibration. |