Performance Specification
Combustible Gas
|
Range |
0 to 100 % LEL or 0 to 5 % CH4 |
|
Resolution |
1 % LEL or 0.05 % vol CH4 |
|
Reproducibility |
3 % LEL, 0 % to 50 % LEL reading or 0.15 % CH4, 0.00 % to 2.50 % CH4 (normal temperature range) |
|
5 % LEL, 50 % to 100 % LEL reading or 0.25 % CH4, 2.50 % to 5.00 % CH4(normal temperature range) |
|
|
5 % LEL, 0 % to 50 % LEL reading or 0.25 % CH4, 0.00 % to 2.50 % CH4(extended temperature range) |
|
|
8 % LEL, 50 % to 100 % LEL reading or 0.4 % CH4, 2.50 % to 5.00 % CH4(extended temperature range) |
|
|
Response time |
90% of final reading (Typical) <15 seconds(pentane) <10 seconds (methane) (normal temperature range) |
Oxygen
The oxygen sensor has built-in temperature compensation. However, if temperature shifts dramatically, the oxygen sensor reading may shift. Zero the device at the work place temperature for the least effect.
|
Range |
0 to 30 vol.% O2* |
|
Resolution |
0.1 vol.% O2 |
|
Reproducibility |
0.7 vol.% O2 for 0 to 30 vol.% O2 |
|
Response time (Typical) |
(90% of final reading) <10 second (normal temperature range) |
|
Sensor Cross-Sensitivity |
The oxygen sensor has no common cross-sensitivities. |
Carbon Monoxide
|
Range |
0 - 1999 ppm (0 - 1999 mg/m3) CO |
|
Resolution |
1 ppm CO for 6 to 1999 ppm |
|
Reproducibility |
±5 ppm O or 10 % of reading, whichever is greater |
|
±10 ppm CO or 20 % of reading, whichever is greater |
|
|
Response time |
90% of final reading |
|
Test Gas Applied |
Concentration (PPM) Applied |
CO Channel % |
|
Hydrogen Sulfide (H2S) |
40 |
0 |
|
Carbon Monoxide (CO) |
100 |
100 |
|
Nitric Oxide (NO) |
50 |
84 |
|
Nitrogen Dioxide (NO2) |
11 |
0 |
|
Sulfur Dioxide (SO2) |
9 |
-4 |
|
Chlorine (Cl2) |
10 |
0 |
|
Hydrogen Cyanide (HCN) |
30 |
-5 |
|
Ammonia (NH3) |
25 |
0 |
|
Toluene |
53 |
0 |
|
Isopropanol |
100 |
-8 |
|
Hydrogen (H2) |
100 |
48 |
Hydrogen Sulphide
|
Range |
0 - 200 ppm H2S |
|
Resolution |
1 ppm H2S, for 3 to 200 ppm H2S |
|
Reproducibility |
±2 ppm H2S or 10 % of reading, whichever is greater (normal temperature range) |
|
±5 ppm H2S or 10 % of reading, whichever is greater |
|
|
Response time |
90 % of final reading |
|
Test Gas Applied |
Concentration (PPM) Applied |
H2S Channel % |
|
Hydrogen Sulfide (H2S) |
40 |
100 |
|
Carbon Monoxide (CO) |
100 |
1 |
|
Nitric Oxide (NO) |
50 |
25 |
|
Nitrogen Dioxide (NO2) |
11 |
-1 |
|
Sulfur Dioxide (SO2) |
9 |
14 |
|
Chlorine (Cl2) |
10 |
-14 |
|
Hydrogen Cyanide (HCN) |
30 |
-3 |
|
Ammonia (NH3) |
25 |
-1 |
|
Toluene |
53 |
0 |
|
Isopropanol |
100 |
-3 |
|
Hydrogen (H2) |
100 |
0 |
Hydrogen Sulphide Low Concentration (H2S-LC)
|
Range |
0 - 100 ppm H2S |
|
Resolution |
0.1 ppm H2S |
|
Reproducibility |
±0.2 ppm H2S or 10 % of reading, whichever is greater (normal temperature range) |
|
±0.5 ppm H2S or 20 % of reading, whichever is greater (extended temperature range) |
|
|
Response time |
90 % of final reading |
Nitrogen Dioxide
|
Range |
0 - 50 ppm NO2 |
|
Resolution |
0.1 ppm NO2 |
|
Reproducibility |
±1 ppm NO2 or 10% of reading, whichever is greater (normal temperature range) |
|
±2 ppm NO2 or 20% of reading, whichever is greater (extended temperature range) |
|
|
Response time |
90% of final reading |
Sulfur Dioxide
|
Range |
0 - 20 ppm SO2 |
|
Resolution |
0.1 ppm SO2 |
|
Reproducibility |
±1 ppm SO2 or 10% of reading, whichever is greater (normal temperature range) |
|
±2 ppm SO2 or 20% of reading, whichever is greater (extended temperature range) |
|
|
Response time |
90% of final reading |
Hydrogen Resistant CO (CO H2-RES)
|
Range |
0 - 2000 ppm CO |
|
Resolution |
1 ppm CO |
|
Reproducibility |
±5 ppm CO or 10% of reading, whichever is greater (normal temperature range) |
|
±10 ppm CO or 20% of reading, whichever is greater (extended temperature range) |
|
|
Response time |
90% of final reading |
| Hydrogen resistance | <5% |