Technical Specifications/Certifications
Technical Specifications
|
Weight |
7.9 oz. (instrument with battery and clip) |
|||||||
|
Dimensions (L x W x H) |
4.4 x 3.00 x 1.37 inches – without fastening clip |
|||||||
|
Alarms |
Four gas alarm LEDs, a charge status LED, an audible alarm and a vibrating alarm |
|||||||
|
Volume of |
95 dBA typical |
|||||||
|
Display |
LCD display |
|||||||
|
Battery type |
Rechargeable Li polymer battery. Li polymer battery must not be charged in Ex area. |
|||||||
|
Device run time |
22 hours at 77 °F (25 °C) |
|||||||
|
Charging time |
£ 4 hours The maximum safe area charging voltage Um = 6.7 VDC |
|||||||
|
Warm up time |
2 min |
|||||||
|
Temperature range |
14 to 104°F (-10 to 40°C) |
Normal operating range |
||||||
|
-4 to 122°F (-20 to 50°C) |
Extended operating range |
|||||||
|
50 to 95°F (10 to 35°C) |
While charging battery |
|||||||
|
-40 to +140°F (-40 to 60°C) |
Intrinsic safety ambient temperature range (, IEC) |
|||||||
|
Humidity range
|
15% - 90% |
relative humidity, non-condensing, |
||||||
|
5% - 95% |
RH intermittent |
|||||||
|
Atmospheric pressure range |
800 to 1200 mbar |
|||||||
|
Ingress |
IP 67 |
|||||||
|
Measuring |
Combustible gases: Catalytic sensor Oxygen: Electrochemical sensor Toxic gases: Electrochemical sensor |
|||||||
|
Measuring range |
Combustible |
O2* |
CO |
H2S |
H2S-LC | NO2 | SO2 | CO-H2 |
|
|
0-100% LEL 0-5.00% Vol. CH4 |
0-30% Vol. |
0-1999 ppm |
0-200 ppm |
0-100 ppm | 0-50 ppm | 0-20 ppm | 0-2000 ppm |
*This device is not approved for use in atmospheres containing >21% oxygen.