Measurement Mode [Normal Operation]
In Normal Operation mode, the user can check the Minimum and Peak readings prior to clearing the STEL and TWA values or performing a Span and Zero Calibration.
The following options pages can be executed from the Normal Operation screen:
|
Bump Page This page allows the user to perform a bump test. |
|
|
|
Peak Page This page shows the peak readings for all sensors. |
|
|
|
Min Page This page shows the minimum reading for the oxygen sensor. |
|
|
|
STEL Page This page shows the calculated STEL readings of the device. |
|
|
|
TWA Page This page shows the calculated TWA readings of the device. |
|
|
|
Time / Date Page This page shows actual time and date settings of the device. |
|
|
|
Discoverable Mode This page allows the user to put the device into Bluetooth discoverable mode in order to pair with another device. |
|
|
|
Motion Alert (optional) This page allows the Motion Alert Feature to be -activated or deactivated. |
|
|
Using the three device buttons, the user can navigate through each sub-menu in a top/down sequence.
Refer to Figure 1 Device overview and Appendix for detailed instructions on navigating through these screens.