Power On and Off

To power on the device:

1. Press and hold the right navigation button for 1 second.
2. The device will proceed to the startup sequence.

The startup sequence includes the following:

○ Introduction screens
○ Self-testing
○ Sensor alert setpoints
○ Bump test and calibration information
○ Fresh Air Baseline (if enabled)
○ Lock-outs (if enabled and active)

NOTE: During power on, the device performs a self-test. This self-test ensures properly functioning display, audible horn, LEDs and vibration.

 

 

To power off the device:

1. Press and hold the right navigation button for 1 second.
2. To confirm power off, select the right navigation button on the next screen.