Faults

WARNING! 

If the device is in critical fault mode, the device will not be monitoring for gas.

Failure to follow this warning can result in serious personal injury or death.

There are two types of faults: noncritical and critical.

Alarm events have priority over fault events. If a point has an alarm during a fault event, the point tile on the dashboard shows in red to indicate the alarm, not in yellow to indicate the fault.

Faults can be acknowledged and reset through the pop-up if it is a channel related fault. If the fault is system related, it is acknowledged and reset through the fault tab in the event log. Once the reset is initiated on the system related faults, it will reset all of the faults concurrently. For faults related to the display, the system will notify the user upon reset.