Accessories
Additional information is available upon request for any of the accessories below.
Test Lamp with Charger - PN TL105-1001
Due to the advanced discrimination of the FL5000, the TL105 Test Lamp was developed. The Test Lamp is a battery operated, rechargeable, test source specifically designed to test General Monitors’ IR Flame Detection Systems. It consists of a high-energy broadband radiation source that emits sufficient energy in the infrared spectra to activate the IR detector. To simulate a fire, the TL105 Test Lamp automatically flashes a signal that the FL5000 recognizes.
For full instructions see Test Lamp.
Figure 22 Test Lamp Accessory
Mounting Bracket - PN 71370-1
A mounting bracket is available to mount the FL5000 to a wall, pole, etc. The mounting bracket design allows for optical alignment adjustments when utilizing to a fixed installation. Please refer to Figure 11 Detector Mounting and Installation.
Figure 23 Mounting Bracket Accessory
Rain Guard - PN 712004-1
To install the Rain Guard accessory:
| 1. | Before assembling the Rain Guard to the flame detector, place the clamp into the mating groove of the rain guard. |
| 2. | Slide the Rain Guard/clamp over the face of the FL5000. |
NOTE: The center arrow must align with the center of the front housing.
| 3. | Tighten the hose clamp with a torque driver to 22 in-lb (2.5 N-m). |
_456x200.jpeg)
Figure 24 Rain Guard Accessory
Air Curtain - PN 712881-1
The Model AC45 Compressed Air Curtain accessory protects the optical surfaces of your MSA IR flame detector. It uses positive air pressure to create a protective air curtain that prevents contaminants from settling onto the detector’s optical surfaces. See the AC45 Air Curtain data sheet and manual for additional details.
_365x200.jpeg)
Figure 25 Air Curtain Accessory
Field Wiring Connections
3/4" NPT Plug - PN 10177576
A stainless steel, explosion proof conduit 3/4-14 NPT plug.
M25 Plug - PN 10203507
A stainless steel, explosion proof conduit plug.
Thread Adapter - PN 914-196
A stainless steel explosion proof 3/4" NPT Male to M25 Female adapter.
FL4000H Upgrade Kit - PN 10242703
Figure 26 FL4000H Upgrade Kit Quick Start Insert