Cleaning the Remainder of the SCBA
If the SCBA is soiled with heavy smoke residue or dirt accumulation, in a well ventilated area, use a sponge dampened with a mild soap solution or a soft/medium bristle brush to remove deposits from the following components:
|
•
|
Harness (straps and buckles) |
|
•
|
Carrier (band and latch assembly, cylinder valve locking button) |
|
•
|
Cylinder (handwheel, gauge, outlet connection) |
|
•
|
Pressure reducer (bell and coupling nut connection) |
NOTE: Put a cover on the regulator outlet to prevent water, dirt, or debris from going into the regulator.
Make sure there is no water, moisture, or dampness on or in any of the components before returning the SCBA to service.
Use the inspection procedures in Visual Inspections to examine the entire SCBA as it is reassembled.