Product Specification

System Requirements

Component ANSI/OSHA CSA EN ABNT / NBR IRAM

Anchorage Connector Standard

ANSI Z359.18/
OSHA 1926.502, 1910.140

CSA Z259.15

EN 795* and/or TS 16415

NBR 16325:2014

 IRAM 3605

Harness Standard

ANSI Z359.11/
OSHA 1926.502, 1910.140

CSA Z259.10

EN 361*

NBR 15836:2020

 IRAM 3605

Connectors Standard

ANSI Z359.12/
OSHA 1926.502, 1910.140

CSA Z259.12

EN 362*

NBR 15837:2020

 IRAM 3605

Retractable Type Fall Arresters

ANSI Z359.14-2021/
OSHA 1926.502, 1910.140

CSA Z259.2.2-17

EN 360* and
EN 362*

NBR 14628:2020

 IRAM 3605

Structure Strength
(Anchorage Point)

3600 lbs (16 kN) certified
5000 lbs (22.2 kN) non-certified

5000 lbs (22.5 kN)

12 kN (Exception: MEWP application, see section Mobile Elevated Work Platform / Aerial Lift / Bucket Truck Installation and Use)

12 kN

 12 kN
Energy Absorber       NBR 14629:2020 IRAM 3605

This personal protective equipment (PPE) complies with European Regulation (EU) 2016/425 and the PPE Regulation (EU) 2016/425 as retained in UK Law and amended*.

* Considering harmonized/designated EN standards.

NOTE: The product may comply with standards shown. See product label for specific compliance information. Those designated with a certification mark are listed with the corresponding agency as compliant to the applicable standard.

CE Approval

  

Notified bodies:
SATRA Technology Europe Ltd
Bracetown Business Park, Clonee, D15 YN2P,
Ireland (NB Number 2777)

Production control phase:
INSPEC International B.V.
Beechavenue 54, 1119 PW, Schiphol - Rijk
Netherlands (NB Number 2849)

EU Representative:
MSA Technologies & Enterprise Services GmBH
Thiemannstrasse 1,
D-12059 Berlin

UKCA Approval

Approved body for product certification:
SATRA Technology Centre Limited
Wyndham Way, Telford Way,
Kettering, Northamptonshire,
NN16 8SD, United Kingdom
(AB0321)

Approved body for site surveillance:
INSPEC International Ltd,
56 Leslie Hough Way,
Salford, Greater Manchester,
M6 6AJ, United Kingdom
(AB0194)

UK representative:
MSA Britain Ltd.,
Unit 9, Beeches Road, Industrial Estate
Yate, United Kingdom
BS37 5QT

PFL Materials, Web

Component Standard Material
Case Polycarbonate
Drum Stainless Steel / Nylon
Chassis, Pawl, Swivel Assembly, Main Spring Stainless Steel
Lifeline 1.8m: 2/3" (17 mm) wide / 0.06" (1.4 mm) thick, HMPE
3m: 3/4" (19mm) wide / 0.07 (1.75mm) thick, HMPE warp and polyester weft
Connectors Steel OR Aluminum
Energy Absorber Cover Thermoplastic Elastomer (TPE)

PFL Materials, Cable

Component Standard Material
Case Polycarbonate
Drum Aluminum / Nylon
Chassis, Pawl, Swivel Assembly, Main Spring Stainless Steel
Lifeline 5mm DIA Galvanized Steel Cable
Connectors Steel OR Aluminum
Energy Absorber Cover Thermoplastic Elastomer (TPE)

PFL Materials, Arc-Flash

Component Standard Material
Case Polycarbonate
Drum Stainless Steel / Nylon
Chassis, Pawl, Swivel Assembly, Main Spring Stainless Steel
Lifeline 3/4" (19mm) wide / .08" (2 mm) thick, Para-aramid and Meta-aramid Blend
Connectors Steel OR Aluminum
Energy Absorber Cover PAN and Para-aramid Blend
* The V-TEC Arc-Flash PFL has undergone arc exposure as stated within ASTM F887, where the PFL was exposed to an electrical arc of 40 cal/cm2 and it did not exhibit any signs of melting, dripping, or ignition of any system component during or after testing. Following exposure the V-TEC Arc-Flash PFL was successfully tested to the appropriate industry standard ensuring reliability in the event of a fall.