Ordering Information
Replacement Parts
See Table 18 for replacement parts. For a full list of replacement sensors, see A-5K-SENS (currently not part of the manual). To obtain a replacement sensor, address the order or inquiry to:
Mine Safety Appliances Company
1000 Cranberry Woods Drive
Cranberry Township, PA 16066
or call, toll-free, 1-800-672-4678.
Inquiries can also be e-mailed to customer.service@msasafety.com.
WARNING!
Use only genuine MSA replacement parts when performing any maintenance procedures provided in this manual. Failure to do so may seriously impair sensor and gas monitoring performance, alter flameproof/explosionproof characteristics or void agency approvals. Failure to follow this warning could cause the product to fail to perform as designed and persons who rely on this product for their safety could sustain serious personal injury or loss of life.
Repair or alteration of the ULTIMA X5000 Gas Monitor, beyond the scope of the maintenance procedures provided in this manual or by anyone other than authorized MSA service personnel, could cause the product to fail to perform as designed and persons who rely on this product for their safety could sustain serious personal injury or loss of life.
Table 18 Replacement Parts and Accessories
Type |
Description |
Part Number |
|
PCBA Assemblies |
|
Refer to A-X5000-PCB |
|
Sensor Body |
|
Refer to A-5K-SENS |
|
Sensors, All |
|
Refer to A-5K-SENS |
|
Sensor Guard, XCell |
REPLACEMENT SENSOR GUARD FOR XCELL SENSORS |
10184683 |
|
Sensor Guard, ULTIMA XIR PLUS |
REPLACEMENT SENSOR GUARD FOR XIR PLUS SENSORS |
10184684 |
|
Mounting Bracket Kit |
MOUNTING BRACKET, ULTIMA X5000, KIT |
10179361 |
|
Calibration Kit |
CALIBRATION HARDWARE (CYLINDER NOT INCLUDED) |
CALKIT1 |
|
Junction Box
|
316 STAINLESS STEEL, ¾ NPT, NORTH AMERICAN APPROVALS |
10179229 |
|
316 STAINLESS STEEL, ¾ NPT, EUROPEAN APPROVALS |
10179509 |
|
|
316 STAINLESS STEEL, M25, EUROPEAN APPROVALS |
10179511 |
|
| JB5000 Junction Box |
3/4" NPT CSA/ATEX/IEC Approved M25 CSA/ATEX/IEC Approved 3/4" NPT FM Approved M25 FM Approved |
10213892 10213896 10213892 10213896 |
|
Calibration Cap, XCell |
CALIBRATION CAP, ULTIMA X5000/S5000, PCKGD |
10181450 |
|
Calibration Cap, XIR PLUS |
CALIBRATION CAP, ULTIMA XIR PLUS, PCKGD |
10181461 |
| Duct Mount Kit |
Rectangular Duct Mount Kit, ULTIMA X5000 |
10176947 |
|
Round Duct Mount Kit, Small, ULTIMA X5000 |
10179124 |
|
|
Round Duct Mount Kit, Large, ULTIMA X5000 |
10179321 |
|
|
Pipe Mount Kit, Universal |
20-150 mm Pipe Mount, ULTIMA X5000/S5000 |
10176946 |
|
Pipe Mount Kit, 2" U-Bolt |
2” Pipe Mount Kit, ULTIMA X5000 |
10179873 |
|
Sun Shield |
Sunshield, ULTIMA X5000/S5000 |
10180254 |
|
SM5000 |
Sampling Module, DC Pump Model |
10043264 |
|
SM5000 |
Sampling Module, Aspirated Pump |
10058101 |
|
SM5000 |
Flow Block Digital |
10041866 |
|
SM5000 |
Flow Block XIR |
10042600 |
| XIR Plus | Insect guard | 10225320 |
| X5000 | Short lid assembly | 10187124 |
| X5000 | Deep lid assembly | 10187125 |
| 12 AWG Wire Adapter | 12 AWG (4mmm2) Power Terminal Adapter | 10178512 |
For position of labels, see Label Overview.