Sensor Type Code
The Sensor Type Code is used by the operator to command the X30/X50 instrument to expect the entered sensor type code to match the sensor that is installed. If this does not match the installed sensor, the unit will enter a fault state. The sensors Sensor Type Code can be read via address 1124 above. The user can change this via address 2150. This setting is also accessible via the XGD App when configuring sensor type.
| Gas | Range | Type | Sensor Type Code |
|---|---|---|---|
| Broadband Group 1 | 1,000 ppm | SC | 4101 |
| Broadband Group 2 | 1,000 ppm | SC | 4102 |
| Broadband Group 3 | 1,000 ppm | SC | 4103 |
| Broadband Group 4 | 1,000 ppm | SC | 4104 |
| CO2 | 5,000 ppm | IR | 4097 |
| CO2 | 10,000 ppm | IR | 4098 |
| CO2 | 20,000 ppm | IR | 4099 |